PL2303 USB to UART TTL Cable
YT-TTL05
PL2303 USB to UART TTL Cable
Product Features:
1. TTL-232R-RPi Debug cable provides a USB to TTL Serial interface for Raspberry Pi computer.
2. On board FT232RL/PL2303TA provides single chip USB to asynchronous serial data transfer interface.
3. Entire USB protocol handled by the electronics in the cable USB.
4. Connect directly to a microcontroller UART or I/O pins.
5. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
6. Fully assisted or X-On / X-Off software handshaking.
7. Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
8. Internal EEPROM with user writeable area.
9. 5V safe TTL inputs make the TTL-232R easy to interface to 5V MCU’s.
10. FTDI/PL2303’s royalty-free VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface.
11. Support for FT232R FTDIChip-ID™/PL2303 feature for improved security.
12. 3x/4x ‘flying leads’ outputs provide TXD, RXD and GND,VCC signals.
13. UHCI / OHCI / EHCI host controller compatible.
14. USB 2.0 Full Speed compatible.